RAD Data comm 100 Specifikace Strana 281

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 318
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 280
Installation and Operation Manual Chapter 7 Application Tutorial
Egate-100 Ver. 4.0 IP DSLAM and WiMAX Backhauling over SDH/SONET 7-37
Configuring the Bridge VLAN Memberships
The VLAN memberships (see
Table
7-9
) are configured in the VLAN Membership
menu (Main Menu>Configuration>Applications>Bridge>VLAN Membership).
The required Management VLAN (500) contains the following: the host port, the
bridge ports bound to the E1 logical ports, the bridge ports bound to the Gigabit
Ethernet ports, and the bridge port bound to the Fast Ethernet management
port.
Table
7-9. VLAN Memberships
VLAN Bridge Port Members
500 (management) 1, 2, 3, 4, 111, 112, 113
³ To define the management VLAN memberships:
In the VLAN Membership menu, configure the parameters as illustrated in
Figure
7-50
.
Egate-100
Configuration> Application> Bridge> VLAN Membership
1. VLAN ID (500)
2. Egress Transparent Ports (1-4,111-113)
3. View VLAN ID to Bridge Port []
4. View Bridge Ports to VLAN ID []
ESC-prev.menu; !-main menu; &-exit
Figure
7-50. Configuring Management VLAN Memberships
Running Diagnostic Tests
Egate-100 allows you to check network integrity by running ping and PRBS tests
and displaying self-test results.
For detailed instructions on running the diagnostic tests and understanding test
results, refer to Chapter 5,
Performing Diagnostics Tests
.
³ To access test results:
Navigate to Main Menu>Diagnostics.
The Diagnostics menu appears as illustrated in
Figure
7-51
.
Egate-100
Main Menu> Diagnostics
1. PING >
2. BERT >
3. Self test result >
Please select item <1 to 3>
ESC-prev.menu; !-main menu; &-exit
Figure
7-51. Diagnostics Menu
Zobrazit stránku 280
1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 317 318

Komentáře k této Příručce

Žádné komentáře