
Chapter 4 Configuration Installation and Operation Manual
4-78 Configuring Egate-100 for Operation Egate-100 Ver. 4.0
Parameter Description Possible Values
EIR Defines the Excess Information Rate (EIR). The EIR
specifies an extra bandwidth with no service
guarantee (“yellow bucket” rate).
Granularity: 64 Kbps up to 130 Mbps and
512 Kbps up to 1 Gbps
Default: 32,000
0 –1,000,000 kbps
EBS Defines the Excess Burst Size (EBS). The EBS specifies
the extra burst with no service guarantee (“yellow
bucket” size).
1 x Byte granularity
Default: 1600
0-32767 Bytes
Defining Shaper Profiles
Traffic shaping is commonly applied to control traffic flow entering the network A
traffic shaper is necessary to obtain a traffic pattern that can be easily policed
(see
Defining Policer Profiles
). Shaper profiles can be applied to traffic flows to
ensure the desired flow classification and prioritization. Shaper configuration can
be defined using the Shaper Profiles menu.
Traffic shaping
is only available if the application is set to Flows Support. For
information about configuring Flow Support, see
Quick Start Guide
.
³ To configure shaper profiles:
1. Navigate to Configuration > Application > QoS.
The QoS Profiles menu appears as illustrated in
Figure
4-72
.
2. From the QoS menu, select Shaper Profiles.
The Shaper Profiles menu appears as illustrated in
Figure
4-80.
Egate-100
Configuration > Application > QoS > Shaper Profiles
1. Profile Name ... (S1)
2. CIR [0-100000] ... (100000)
>
s-Save, r-Remove, f-Forward, b-Backward
ESC-prev.menu; !-main menu; &-exit
Figure
4-80. Shaper Profiles Menu
3. Select Profile Name and define a new profile name.
4. Define the associated shaper parameters according to
Table
4-34.
5. Select Save.
Not
Komentáře k této Příručce