
Chapter 6 Software Upgrade Installation and Operation Manual
• Starting Upload
• Starting Download
• Upload Failed
• Download Failed.
The system messages are stored in the event log file. For additional information
regarding the log file, refer to
Chapter 5
.
Transferring Software Files via X-Modem
³ To transfer files via X-Modem:
1. Navigate to Main menu > Utilities > File Utilities > SW & File Transfer
> X-Modem.
The X-Modem menu appears.
2. Select Command.
The X-Modem Command menu appears as illustrated in
Figure
6-2
.
3. Select the required download or upload operations.
Egate-100
Main Menu> Utilities> File Utilities> SW & File Transfer> X-Modem>
Command
1. SW download to main
2. SW download to backup
3. Configuration file download
4. Configuration file upload
5. Log file upload
Please select item <1 to 6>
ESC-prev.menu; !-main menu; &-exit
Figure
6-2. X-Modem Command Menu
Saving/Deleting the Current Configuration as Default
You can save any current setting as the device default setting in order to replace
the original factory default settings, thus enabling Egate-100 to use these
settings when ‘resetting Egate-100 to the factory defaults.
If required, you can erase these settings completely and restore the factory
defaults.
³ To save the current configuration as the default configuration:
• From the File System menu (
Figure
6-3
), select Save Default Configuration
File.
The current values of all configuration parameters are saved as the unit's
default values.
³ To delete the saved default configuration and restore the original factory default:
• From the File System menu, select Delete Default Configuration File.
6-4 Upgrading Egate-100 Software via the File Utilities Menu Egate-100 Ver. 4.0
Komentáře k této Příručce