RAD Data comm FCD-IP Uživatelský manuál Strana 75

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 110
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 74
RADview FCD-IP User’s Manual Chapter 3 Port Management
Resetting the Link 3-37
Configuring DHCP Relay
To set DHCP Relay:
1. Select the desired link.
2. Select Configuration >Network Parameters > DHCP Relay…
The DHCP Relay Parameters dialog box appears.
Figure 3-27. DHCP Relay Parameters
Table 3-25. DHCP Relay Parameters
Parameter Possible Values / Remarks
Interface Link 1, Link 2, Link 3
Description String containing information about the interface.
Type
DS1, MODEM, Frame Relay, PPP, SHDSL
Enable Relay
Enabled, Disabled
Relay IP Address 0.0.0.0, 1.0.0.0…223.255.255.255
3.6 Resetting the Link
To reset the link:
1. Select a Link or Channel.
2. Select Configuration > Reset…
or
click the Reset icon on the toolbar
.
The following message appears: “RESETTING LINK. Operation may disrupt
network data.”
3. Click <OK> to confirm Reset.
Zobrazit stránku 74
1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 109 110

Komentáře k této Příručce

Žádné komentáře