RAD Data comm E1 Interface Converter RIC-E1 Specifikace Strana 47

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 94
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 46
RIC-E1 Installation and Operation Manual Appendix B IR-ETH Interface Module
Installation and Operation B-5
Table B-4. IR-ETH LED Indicators, RIC-E1/R
LED Name Description Location Color
PWR ON – RIC-E1/R is powered up Front panel Green
LINK ON – LAN is connected to the IR-ETH module Front panel Green
ACT ON – LAN is receiving/transmitting data Front panel Yellow
100M Not relevant for IR-ETH Front panel Green
LOS
ON – No E1 data is received from the link
Front panel
Red
ERR D4 ON – Bridge buffer overrun On the
IR-ETH board
Red
Connecting the LAN
Use either a straight cable or a cross-cable for the LAN connection.
Use a cross cable when connecting to a port that does not implement the
crossover function internally. Otherwise, use a straight cable.
Hubs usually do implement the crossover function internally, while network
interface cards and other devices do not.
Note
Zobrazit stránku 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 93 94

Komentáře k této Příručce

Žádné komentáře