RAD Data comm 10/100BaseT to STM-1/OC-3 Converter RIC-155 Specifikace stáhnout pdf (Strana 45)

RIC-155 Installation and Operation Manual Chapter 4 Configuration

Configuring the Physical Ports 4-9

4.3 Configuring the Physical Ports

Physical ports of RIC-155 include the following configurable subsystems:

• Data 10/100BaseT port

• Management 10/100BaseT port

• STM-1/OC-3c port.

Configuring the Ethernet Interface



To configure the Ethernet interface:

1. Follow the path: Physical Ports Configuration > Ethernet Configuration >

DATA Port or MNG Port.

DATA Port or MNG Port menu appears (see Figure 4-12).

2. From the DATA Port or MNG Port menu, configure the following parameters:

 Autonegotiation (Enable or Disable)

 Flow Control (Enable or Disable)

 Ethernet Mode (Full Duplex or Half Duplex)

 LAN Speed (10 Mbps or 100 Mbps).

RIC-155

DATA Port

1. Auto-negotiation: (Disable)

2. Flow Control: (Enable)

3. Ethernet Mode: (Full Duplex)

4. LAN Speed: (100 Mbps)

Please select item <1 to 4>

ESC-prev.menu; !-main menu; &-exit

Figure 4-12. DATA Port Menu

If autonegotiation is enabled, the Ethernet Mode and LAN speed options are masked.

Configuring the STM-1/OC-3c Interface

The STM-1/OC-3c interface of RIC-155 is based on the SDH/SONET framer that

implements mapping functions of a channel for SDH/SONET processing at

155.52 Mbps.



To configure STM-1/OC-3c interface:

1. Follow the path: Configuration > Physical Ports Configuration > Uplink

Configuration.

The Uplink Configuration menu appears (see Figure 4-13).

2. From the Uplink Configuration menu, configure the following parameters

Note

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 89 90

Žádné komentáře

RAD Data comm 10/100BaseT to STM-1/OC-3 Converter RIC-155 Specifikace Strana 45