Rad-data-comm ASM-60 Uživatelský manuál Strana 43
- Strana / 74
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
ASM-60 Installation and Operation Manual Appendix B IR-ETH/QH Interface Module
Installation and Operation B-3
B.4 Installation and Operation
Figure B-3 shows location of the configuration DIP switch on the module’s board.
S1
ON
87654321
Figure B-3. DIP Switch Location
Setting the DIP Switch
Configure the IR-ETH/QH module by setting the DIP switch in accordance with
Table B-2. The DIP switch is located on the reverse side of the IR-ETH/QH
module. To change the switch settings, you must undo three screws on the board
and detach the module from the main unit.
Table B-2. DIP Switch Settings
Section Name Description Possible Settings Factory Setting
1 NC OFF
2 NC OFF
3 10/100 Selects the LAN speed
ON – LAN speed is set to 100 Mbps
OFF – LAN speed is set to 10 Mbps
OFF
4 AN1 Controls the LAN
autonegotiation
ON – LAN autonegotiation is disabled
OFF – LAN autonegotiation is enabled
OFF
5 HF1 Selects the LAN mode ON – LAN full duplex mode
OFF – LAN half duplex mode
OFF
6 BPR Controls the backpressure ON – Backpressure is enabled
OFF – Backpressure is disabled
OFF
7 MUL Controls LAN to WAN
multicasting
ON – Multicast messages from LAN to
WAN are blocked
OFF – Multicast messages from LAN to
WAN are not blocked
OFF
8 BRD Controls LAN to WAN
broadcasting
ON – Broadcast messages from LAN
to WAN are blocked
OFF – Broadcast messages from LAN
to WAN are not blocked
OFF
- 10 Mbps VDSL-Based Modem 1
- Warranty 3
- Safety Warnings 4
- Telecommunication Safety 4
- Regulatory Information 4
- Quick Start Guide 5
- 2. Operating ASM-60 6
- 3. Configuring ASM-60 6
- Contents 7
- List of Figures 8
- List of Tables 8
- Chapter 1 9
- DTE Interface 10
- Management 10
- Test Capabilities 10
- Real Time Alarms 10
- Statistics Collection 10
- 1.2 Physical Description 11
- 1.3 Functional Description 12
- 1.4 Technical Specifications 13
- 1-6 Technical Specifications 14
- Chapter 2 15
- Installation and Setup 15
- 2.2 Package Contents 16
- 2.3 Installation and Setup 16
- Connecting the Interfaces 17
- Connecting the DTE 18
- Connecting the Power 19
- 2-6 Installation and Setup 20
- Chapter 3 21
- Operation 21
- 3.2 Operating ASM-60 22
- Chapter 4 23
- Management from a 23
- Terminal 23
- Initiating a Control Session 24
- Terminal Management Menus 25
- 4.4 Configuring ASM-60 26
- Displaying the ASM-60 Status 28
- 4.6 Resetting ASM-60 29
- 4-8 Resetting ASM-60 30
- Chapter 5 31
- Diagnostics 31
- Working with the Log File 32
- Running the LEDs Test 35
- Appendix A 37
- IR-ETH Interface Module 37
- A.2 Technical Specifications 38
- DIP Switch Settings 40
- LED Indicators 40
- Connecting to LAN 40
- Appendix B 41
- IR-ETH/QH Interface Module 41
- B.3 Technical Specifications 42
- 87654321 43
- Connecting the LAN 44
- Appendix C 45
- IR-IP Interface Module 45
- C.2 Technical Specifications 46
- C.3 Physical Description 46
- IR-IP LEDs 47
- IR-IP DIP Switch 47
- Introduction 48
- General 49
- Connecting the Telnet Host 50
- What to Do If 52
- C.6 IR-IP Management Utility 53
- C.7 Quick Setup Menu 54
- LAN IP Address 55
- LAN IP Mask 55
- WAN IP Address 55
- WAN IP Mask 55
- C.8 Management Access Menu 56
- C.9 Advanced Setup Menu 57
- Device Identification Menu 58
- Interface Parameters Menu 59
- Aging Timeout 60
- Self Learn 60
- Maintenance Protocol 60
- Protocol Field Compression 61
- Authentication Protocol 61
- Security Host/Guest 62
- User Name To Send 62
- Password To Send 62
- User Name To Accept 62
- Password To Accept 62
- Multicast IP Menu 63
- C.10 Device Control Menu 64
- New Software Download Menu 65
- View Error Log Screen 66
- Resets Menu 66
- C.11 View Menu 67
- ARP Tables 68
- Statistics Screen 69
- Using the Ping Function 71
- C.14 Erasing IR-IP Software 72
- Downloading New Software 73
Související produkty a manuály pro Hardware Rad-data-comm ASM-60
Hardware Rad-data-comm 146 Uživatelský manuál
(10 stránky)
(10 stránky)
Hardware Rad-data-comm ASMi-31 Uživatelský manuál
(66 stránky)
(66 stránky)
Hardware Rad-data-comm IPmux-11 Uživatelský manuál
(148 stránky)
(148 stránky)
Hardware Rad-data-comm HCD-E1 Uživatelský manuál
(232 stránky)
(232 stránky)
Hardware Rad-data-comm ASM-20 Uživatelský manuál
(78 stránky)
(78 stránky)
Hardware Rad-data-comm BR-ASI01 Uživatelský manuál
(39 stránky)
(39 stránky)
Hardware Rad-data-comm T1 Uživatelský manuál
(46 stránky)
(46 stránky)
Hardware Rad-data-comm 100 Uživatelský manuál
(9 stránky)
(9 stránky)
Hardware Rad-data-comm IPmux-1 Uživatelský manuál
(143 stránky)
(143 stránky)
Hardware Rad-data-comm ASMi-52 Uživatelský manuál
(186 stránky)
(186 stránky)
Hardware Rad-data-comm BLW-04EX Uživatelský manuál
(59 stránky)
(59 stránky)
Hardware Rad-data-comm LRS-24 Uživatelský manuál
(150 stránky)
(150 stránky)
Hardware Rad-data-comm ASM-10/8 Uživatelský manuál
(50 stránky)
(50 stránky)
Hardware Rad-data-comm MBE10-1D Uživatelský manuál
(58 stránky)
(58 stránky)
Hardware Rad-data-comm ASMI-450 Uživatelský manuál
(117 stránky)
(117 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.068 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce