RAD Data comm IPmux-11 Specifikace Strana 115

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 148
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 114
Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics
IPmux-11 Ver. 2.00 Testing IPmux-11 6-17
6.5 Testing IPmux-11
Diagnostic capabilities of IPmux-11 include:
External loopbacks
Inband remote loopbacks for T1 lines
Internal loopbacks
Pinging IP hosts
Running a trace route.
Running Loopbacks
Running External Loopback
IPmux-11 can be set to start an external loopback to test the connection between
the E1/T1 port and the PBX. In this mode, data coming from the PBX is both
looped back to the PBX and transmitted forward to the IP network
(see
Figure 6-10).
Figure 6-10. External Loopback
Running Internal Loopback
The E1/T1 module can be set to start an internal loopback to test the connection
between the E1/T1 port and the IP network. In this mode, data coming from the IP
network is both looped back to the IP network and transmitted forward to the PBX
connected to the E1/T1 port (see
Figure 6-11).
Figure 6-11. Internal Loopback
Zobrazit stránku 114
1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 147 148

Komentáře k této Příručce

Žádné komentáře